Water Bird provides engineered wastewater treatment solutions for commercial, industrial, hospitality, healthcare, infrastructure, and municipal applications across Dubai, Abu Dhabi, UAE, GCC, MENA, India, and international markets. Our systems support safe wastewater treatment, water reuse, odor control, environmental compliance, and reliable long-term plant performance.
Sewage Treatment Plants treat domestic wastewater from toilets, kitchens, wash areas, residential buildings, hotels, labour accommodations, commercial developments and infrastructure facilities. STP systems convert sewage into treated water suitable for disposal or reuse — irrigation, flushing, cooling tower make-up and other approved non-potable uses depending on local authority requirements and final treated water quality.
Screening · Biological treatment · Clarification · Filtration · Disinfection · Sludge handling · Treated effluent reuse. Systems are designed based on project capacity, wastewater characteristics, treatment objective, site space, automation requirement and compliance needs.
Effluent Treatment Plants treat industrial wastewater from manufacturing, food processing, laundries, workshops, chemical processes, metal finishing, vehicle washing, factories and other industrial operations. ETP systems are designed based on actual effluent characteristics — pH, COD, BOD, TSS, oil and grease, colour, odour, heavy metals and chemical contaminants.
Screening · Equalization · pH Correction · Coagulation & Flocculation · DAF / Clarification · Biological Treatment · Filtration · Disinfection · Sludge Handling · Final Polishing. Process selection is based on wastewater type and required discharge or reuse standard.
TSE polishing plants further treat treated sewage effluent for improved reuse quality, reducing suspended solids, turbidity, colour, odour, organics, microorganisms and dissolved impurities. Water Bird supplies TSE polishing systems using suitable combinations of filtration, ultrafiltration, activated carbon, disinfection, reverse osmosis and chemical dosing based on treated water quality requirements.
Turbidity reduction · TSS removal · Colour and odour control · Microbial control · Final treated water polishing. Treatment process selection is based on required reuse quality and final application standards.
Grey water recycling systems treat wastewater collected from showers, wash basins, hand wash areas and selected non-toilet sources. Grey water can be treated for reuse in flushing, irrigation and other non-potable applications, depending on project requirements and local regulations. Grey water recycling helps reduce freshwater demand, lower utility consumption and support sustainable water management.
Suspended solids removal · Biological treatment · Filtration · Disinfection · Treated water polishing for approved non-potable reuse. System design is based on grey water source, flow rate and required reuse quality.
Vehicle wash water recycling plants treat wastewater from car wash bays, bus wash facilities, truck wash areas, equipment wash stations and industrial wash zones. Vehicle wash wastewater may contain suspended solids, oil, grease, detergents, dirt and metals. A recycling system helps recover and reuse wash water while reducing discharge volume and freshwater consumption.
Oil separation · Sediment removal · Filtration · Chemical treatment · Clarification · Final polishing for wash water reuse. Treatment stages are selected based on wastewater contamination level and reuse quality requirement.
Sewage lifting stations are used where wastewater must be pumped from a lower level to a higher level or transferred to a treatment plant, sewer network or main collection point. Odour control units reduce foul smell caused by gases such as hydrogen sulphide from sewage collection systems, wet wells, pumping stations and wastewater treatment areas.
Wet well / collection tank · Submersible sewage pumps · Level control system · Control panel · Non-return valves · Isolation valves · Ventilation arrangement · Odour control unit · Activated carbon or chemical scrubber system where required.
Sludge dewatering systems reduce the water content of sludge generated from STP, ETP and wastewater treatment processes. Dewatering helps reduce sludge volume, improve handling, reduce disposal cost and support cleaner plant operation. Water Bird supplies sludge dewatering equipment for municipal, commercial and industrial wastewater treatment applications.
Sludge volume reduction · Improved handling · Reduced disposal cost · Dryer cake production. Polymer preparation and dosing support available where required for improved dewatering performance.
Neutralization systems correct acidic or alkaline wastewater before discharge, reuse or further treatment. Commonly used in laboratories, industries, boiler blowdown systems, chemical handling areas and process plants where wastewater pH must be controlled. Water Bird supplies neutralization systems with suitable tanks, mixers, dosing pumps, pH sensors, control panels and chemical dosing arrangements based on site requirements.
Neutralization tank · Mixers · Dosing pumps · pH sensors · Control panel · Chemical dosing arrangement. System sizing and chemical selection is based on wastewater pH range, flow rate and discharge requirements.
Customized recycling plants are designed for projects where standard wastewater treatment equipment is not sufficient — developed based on wastewater characteristics, reuse target, discharge requirement, space availability, operating cost and project-specific compliance needs. Water Bird provides customized recycling plants for commercial, industrial, infrastructure, utility and special wastewater reuse applications.
Water recovery · Filtration · Biological treatment · Membrane treatment · Disinfection · Polishing · Reuse quality improvement. Treatment process selection is based on project-specific wastewater characteristics, reuse targets and compliance requirements.
Zero Liquid Discharge systems are designed to recover water and minimize liquid waste discharge. ZLD is used in applications where wastewater discharge must be reduced, restricted or eliminated. Systems may include pre-treatment, filtration, reverse osmosis, evaporation, crystallization, sludge handling and solids management depending on wastewater quality and project requirement. Suitable for high TDS wastewater, industrial process wastewater and water recovery applications where maximum reuse and minimum discharge are required.
Wastewater treatment is essential for reducing pollution, protecting infrastructure, meeting discharge requirements, and supporting sustainable water reuse. Water Bird designs, supplies, installs, commissions, upgrades, and maintains wastewater treatment systems based on influent quality, flow rate, site conditions, reuse targets, and compliance requirements.
Water Bird wastewater treatment solutions are used across a wide range of sectors and facility types where safe treatment, reuse, and environmental compliance are essential.
From wastewater testing and process selection to installation and long-term maintenance, Water Bird supports every stage of your wastewater treatment project.
We assess pH, BOD, COD, TSS, oil and grease, turbidity, odour, microbiological quality, flow rate, and reuse or discharge requirements.
We recommend the suitable wastewater treatment process based on influent quality, application, site space, compliance target, and operating conditions.
We provide engineered systems, tanks, pumps, blowers, filters, membranes, dosing systems, controls, sensors, and accessories.
We support installation, testing, commissioning, troubleshooting, media replacement, membrane cleaning, sludge handling support, O&M, and AMC services.
Water Bird has been delivering water treatment, wastewater treatment, recycling, and environmental engineering solutions since 1990. With 36+ years of engineering experience, 10,000+ projects delivered, 250+ specialists, 7 specialist divisions, a DM Accredited Laboratory, and ISO certified operations, we support wastewater projects across Dubai, Abu Dhabi, UAE, GCC, MENA, India, and international markets.
Engineering water and wastewater solutions since 1990 across commercial, industrial, hospitality, healthcare, infrastructure, and municipal sectors.
A proven track record across STPs, ETPs, recycling plants, and TSE polishing systems for buildings, industries, communities, and infrastructure.
Our Dubai Municipality-accredited laboratory supports wastewater testing, analysis, compliance monitoring, and treatment validation for every project.
ISO 9001, ISO 14001, and ISO 45001 certified management systems ensuring consistent quality, environmental responsibility, and safety standards.
From wastewater testing and process design to supply, installation, commissioning, O&M, AMC, and plant upgrades — one accountable team throughout.
Support across Dubai, Abu Dhabi, Oman, Saudi Arabia, Qatar, GCC, MENA, India, Mangalore, and selected international project markets.
Need a new wastewater treatment plant, recycling system, STP, ETP, TSE polishing plant, lifting station, or odour control solution? Contact Water Bird for wastewater testing, process design, supply, installation, commissioning, maintenance, O&M, and AMC support.
Common questions about Water Bird's wastewater treatment systems, services, and capabilities.
Water Bird provides grey water recycling systems, TSE polishing plants, sewage treatment plants, effluent treatment plants, neutralization systems, sewage lifting stations, odour control units, and vehicle wash water recycling plants for commercial, industrial, municipal, and infrastructure applications.
Yes. Water Bird provides STP, ETP, grey water recycling, TSE polishing, wastewater recycling, and odour control solutions across Dubai, Abu Dhabi, and the UAE for buildings, industries, hotels, communities, and infrastructure projects.
Yes. Treated wastewater can be reused for approved non-potable applications such as irrigation, flushing, wash water reuse, utility use, and process support, depending on treatment quality, local regulations, and project requirements.
Yes. Water Bird provides inspection, troubleshooting, plant optimisation, pump support, filter replacement, membrane cleaning, dosing support, odour control support, O&M, and AMC services for existing wastewater treatment systems.
